In a fiber optic cable manufacturing project, equipment selection is not just about buying a few standalone machines – it is about building an Optical Cable Equipment Production Line that can run stably. As a Premier Cable Machine Manufacturer, Hongkai is also a professional manufacturer of optical cable making equipment, providing configuration solutions from core standalone machines to full-line collaboration for products such as optical cables, outdoor optical cables, indoor optical cables, loose tubes, and insulated cables.
This article focuses on the core equipment and process control of a fiber optic cable production line, explaining how key links such as SZ Stranding Machine Operation, stranding pitch control, PLC controlled extruder, and loose tube stranding support the output of the entire line.

1. Full-Line Perspective: An Optical Cable Equipment Production Line Is Not a Stack of Standalone Machines
A complete fiber optic cable production line usually includes core processes such as fiber coloring, secondary coating/loose tube, SZ stranding and cabling, sheathing extrusion, and pay-off/take-up. The full-line capability of an Optical Cable Equipment Production Line depends on speed matching, tension continuity, and data interoperability between processes.
Hongkai’s SZ stranding line is the core equipment for loose-tube optical cable stranding. It supports simultaneous stranding of 12 tubes, with pay-off tension fluctuation ≤ ±0.4 N and stranding pitch deviation ≤ ±0.08 mm. The key to SZ Stranding Machine Operation is not merely “being able to strand,” but keeping stranding pitch, pay-off tension, and reversal angle stable during continuous production. Stranding pitch control is achieved through PLC stepless setting and a fully differential structure – no gear changes are needed for changeover, and pitch is entered directly on the touchscreen.
For outdoor optical cable projects, Outdoor Optical Cable Equipment must accommodate loose tube stranding, strength member pay-off, water-blocking filling, and sheathing extrusion. In the loose tube stranding process, the matching of loose tube excess length and stranding pitch directly affects the cable’s temperature characteristics and mechanical properties. In Hongkai’s Outdoor Optical Cable Equipment configuration, the SZ stranding line, loose tube stranding, and sheathing line are treated as core units with unified speed and tension chain matching, avoiding upstream backlog and downstream material shortage.

2. SZ Stranding Machine Operation and Stranding Pitch Control: The Core of Stranding Precision
The core of SZ Stranding Machine Operation is “alternating forward-reverse stranding + stable pitch + controllable tension.” Hongkai’s SZ stranding line uses independent servo motors for active pay-off plus real-time closed-loop tension sensor control. Each pay-off reel is independently driven, with pay-off tension fluctuation ≤ ±0.4 N. Stranding pitch control sets the pitch value through the PLC, and electronic gearing synchronizes stranding speed and capstan speed, with pitch deviation ≤ ±0.08 mm.
In actual operation, SZ Stranding Machine Operation must also solve the problem of smooth reversal. The fully differential structure, together with a stranding angle adjustable within ±18°, features zero-position alignment and over-twist alarm protection – during reversal, the tubes do not sway and the pitch does not drift. For high-fiber-count cables, the stability of Stranding pitch control directly determines whether fiber stress is uniform, and also determines whether the subsequent sheathing process can run stably.

3. PLC Controlled Extruder and Cable Insulation Equipment: Core Control of Extrusion and Insulation
In optical cable sheathing and insulated cable production, the PLC controlled extruder is one of the core machines. Hongkai’s PLC controlled extruder is used for sheathing extrusion and insulation extrusion, equipped with imported temperature controllers, PID closed-loop control, and a laser diameter gauge. If the sheath outer diameter deviates by 0.01 mm, the PLC automatically adjusts screw speed; 8-hour continuous production concentricity averages ≥ 98.6%, with wall thickness tolerance ≤ 0.04 mm.
Cable insulation equipment serves insulated cables and control cable production. Control cable production has high requirements for insulation layer thickness uniformity, concentricity, and surface quality. The PLC controlled extruder ensures uniform insulation coating through stable temperature control and extrusion pressure control. For control cable production, speed synchronization between the extruder and capstan, and closed-loop pay-off/take-up tension, are key to ensuring stable wire diameter.
In the optical cable sheathing process, the PLC controlled extruder works with the Fiber optic cable sheathing line, compatible with PE, PVC, LSZH, and other materials. Recipes store different temperature profiles, and material changes can be loaded with one touch.

4. Cantilever Type Twister and Single Twist Strander: Another Core Capability in Stranding Equipment
In addition to SZ stranding, optical cable and cable production also uses the cantilever type twister and single twist strander. The cantilever type twister is suitable for specific cable stranding processes, with a compact structure and large operating space; the single twist strander is suitable for single-twist cabling or stranding scenarios with specific pitch requirements.
In full-line configurations, Hongkai recommends stranding equipment based on the customer’s product type: loose-tube outdoor optical cables use the SZ stranding line and loose tube stranding as the core; for specific control cable or insulated cable projects, a cantilever type twister or single twist strander can be configured and matched with the extrusion and pay-off/take-up units of control cable production in the speed chain.
5. Aramid Yarn Creel and 30 Steel Wire Coated Production Line: Strength Members and Steel Wire Coating
In ADSS optical cables, outdoor optical cables, and certain reinforced-structure cables, the aramid yarn creel is used for aramid yarn pay-off to provide tensile reinforcement. Hongkai’s aramid yarn creel features constant-tension pay-off control – stable yarn tension and uniform stranding pitch – suitable for ADSS optical cable and outdoor optical cable production lines.
The 30 Steel Wire Coated Production Line is aimed at steel wire coating production. This line is used for surface coating treatment of steel wire, equipped with extrusion, cooling, capstan, and take-up units, suitable for outdoor optical cables and specific cable products requiring steel wire reinforcement. When combined with Outdoor Optical Cable Equipment, the 30 Steel Wire Coated Production Line can form a complete configuration from strength member processing to cabling and sheathing.
6. Breakout Extrusion Line and Loose Tube Stranding: Breakout Cables and the Loose Tube Process
The breakout extrusion line is aimed at sheath extrusion for breakout cables and breakout-structure optical cables. Breakout cables have high requirements for sheath cross-section dimensions, breakout structure, and extrusion stability. The breakout extrusion line uses dedicated dies and a PLC controlled extruder to control extrusion output, ensuring stable formation of the breakout structure.
Loose tube stranding is a key process before loose-tube optical cable cabling. During stranding, loose tubes must maintain stable excess length and uniform tension. In Hongkai’s loose tube stranding configuration, the pay-off tension closed loop of the SZ stranding line is linked with the excess length control data of the Secondary coating line for optical fiber – loose tube excess length ±0.2‰, cabling pitch deviation ≤ ±0.08 mm.
7. CE Certified Equipment and Overseas Export Service: Two Core Safeguards for Export Delivery
When overseas customers purchase optical cable production lines, they look not only at equipment capability but also at compliance and delivery. Hongkai’s CE certified equipment is designed according to EN 60204-1, with electrical safety and mechanical safety meeting EU CE certification requirements, and CE technical documentation can be provided upon customer request. CE certified equipment covers core machines such as the SZ stranding line, PLC controlled extruder, Outdoor Optical Cable Equipment, and breakout extrusion line.
Overseas export service is another core capability of Hongkai as a Premier Cable Machine Manufacturer. Overseas export service includes: voltage system adaptation (North America 480V/60Hz, Europe 400V/50Hz, Southeast Asia 230V/50Hz), bilingual operation manuals (Chinese/English), engineers on-site for installation and commissioning (12 to 18 days from unpacking to producing the first qualified reel), spare parts delivered by DHL within three days, and remote video support with a response within two hours.
In overseas projects, Overseas export service also covers localized requirements for regional markets such as Lan-kaapeli (optical cable/cable products). In Lan-kaapeli production line configurations, Hongkai provides adaptation solutions based on local voltage, certification, and operating language.
8. Hongkai Optical Cable and About Us: From Equipment Manufacturing to Full-Line Delivery
Hongkai optical cable equipment covers the entire optical cable production process: SZ stranding line, PLC controlled extruder, Outdoor Optical Cable Equipment, breakout extrusion line, loose tube stranding, aramid yarn creel, 30 Steel Wire Coated Production Line, cantilever type twister, single twist strander, cable insulation equipment, and more.
About Us – Guangdong Hongkai Optical Cable: Guangdong Hongkai Optical Cable Equipment Technology Co., Ltd. began manufacturing wire and cable equipment in 2005 and was formally incorporated in 2015. As a Premier Cable Machine Manufacturer and a professional manufacturer of optical cable making equipment, Hongkai provides core equipment and full-line configurations around the Optical Cable Equipment Production Line. Our equipment has been exported to more than 15 countries and regions, with over 160 sets currently running on production lines worldwide.
Every machine comes with a factory test report, a PLC program backup on USB, bilingual operation manuals (Chinese/English), and a wear-parts kit. The SZ stranding line has pay-off tension fluctuation ≤ ±0.4 N and stranding pitch deviation ≤ ±0.08 mm; the PLC controlled extruder achieves sheath concentricity ≥ 98.6% and wall thickness tolerance ≤ 0.04 mm.
📩 Get an Optical Cable Equipment Production Line Configuration Proposal
If you are procuring an Optical Cable Equipment Production Line for an overseas project, or want to learn about the configuration of core equipment such as the SZ stranding line, PLC controlled extruder, Outdoor Optical Cable Equipment, breakout extrusion line, and loose tube stranding, feel free to contact the Hongkai technical team.
Just tell us three things:
-
What type of optical cable or cable do you want to make? (Outdoor optical cable / breakout cable / control cable / insulated cable)
-
Where will the factory be built? (This affects voltage system and CE certification requirements)
-
Approximately what capacity? (How many kilometers per month or per year)
We will provide a preliminary equipment configuration proposal, a CE certified equipment description, and an Overseas export service plan within 5 working days.
📧 Email: sales2@hkofcmachine.com
🌐 Website: https://hkofcmachine.com/
