Machine instruction : machine direction left → right

 

Ⅱ. Application

Be used for Be used for synchronized wrapping and multi-strands laying up of Data cable (CAT-5, CAT-6), high frequency wire,computer wire, power wire, etab.

Ⅲ. Feature of machine

This machine adopts Taiwan Technology to improve the design and manufacturing. The whole machine with cantilever type structure, adopts PLC Program+ Variable frequency adjustable-speed control+ pneumatic control, can set stranding pitch by PLC, with the advantageous design of not capstan wheel, clutch plate to ensure even tension of wire. To make the geometric structure stable after laying up, adopts single-twist laying up structure, and design the large diameter steering guide wheel to reduce bend and low loss, the cantilever laying up stranding activities, wire drum capstan take-up activities, to ensure the machine with good synchronism and stable stranding pitch by mechanical linkage and electrical control in condition of start up, normal run, slow stop, emergency stop. The whole machine has the feature of stable performance and simple operation to ensure that can produce good quality products.

 

Ⅳ. Main parts brand

Motor:Siemens Beide motor

Transducer:Inovance transducer control

Man-machine interface:WEILUN 6 inch touch screen

PLC: S7-200 system

Bearing: Japan NACHI, KOYO

 

Ⅴ. Main technical parameters and performance

1. Double heads Japanese type pay off rack
2. 4 heads motorized pay off rack

2-1. 4buruak 500 type, 1HP motor dragging, 1HP American Emerson transducer control, be synchronized with main motor

2-2. Displacement senor control, swing type tension control, automatically stop when wire is broken

3. Hub stand（Meter-counting）

3-1. Aluminum foil, ceramic eye moulds

4. Centerwrapping machine

4-1. Rotary drum for tape: diameter of drum: 250mm. Width: 10mm

4-2. Wrapping speed: Max.2500rpm.

4-3. Suitable material: tissue, nylar tape, aluminum foil.

4-4. Power wrapping and lateral passive wrapping are set.

4-5. The partial tension of power wrapping adopts TAIWAN 0.9KG electromagnetic powder clutch.

4-6. The power wrapping speed with single/linkage control, the positive and negative wrapping are alternative.

5. F800mm cantilever single twist machine

5-1. Mechanical type: cantilever type, the parts of coiling can move the traverse in the right and left direction along the straight track, ball key drives, differential-speed controller, electric machine lifts to load and unload wire-bobbin, push and pull the door.

5-2. Single-wire diameter: Φ0.8-4.0mm covering wire.

5-3. Stranding-wire diameter: MAX Φ20mm

5-4. Range of stranding pitch: 20-250mm

5-5. Stranding pitch: touch-screen set on human-machine interface, PLC stepless control, can keep stability when increasing and reducing speed

5-6. Revolution speed of main shaft: Max.800rpm/min

5-7. Wire speed: 15-118m/min

5-8. Traverse distance: 5-25mm (touch-screen set on interface)

5-9. Traverse method: shaft type take-up, there is not pulling and pushing damage during traverse of wire.

5-10. Stranding direction: left or right can be optional

5-11. Main Motor: Motor AC380V/20HPSiemens Beide motor, Transducer: AC380V/20HP Inovance transducer control

5-12. Take-up: Motor AC380V/5HPSiemens Beide motor + Differential; Transducer: AC380V/5HP Inovance transducer control

5-13. Traverse: Motor AC380V/1/2HPSiemens Beide motor + Differential; Transducer: AC380V/1/2HP Inovance transducer control

5-14. Lifting of wire shaft: Electrical Hydraulic lifting

5-15. Wire shaft load and upload motor to lift the loading and uploading of wire drum

5-16. Hartzeko tentsioa: Electromagnetic tension, auto-tracking, take-up tension keep balance without manual adjustment.

5-17. Machine brake: Cantilever main shaft, oil pressure type brake imported from Taiwan, Take-up coiling: Adopts electromagnetic brake.